屋面保温层施工工艺(1001-1996)（Construction technology of roofing insulation layer (1001-1996)）.doc

屋面保温层施工工艺(1001-1996)（Construction technology of roofing insulation layer (1001-1996)） Wanting a thousand miles, one more floor. One loses by pride and gains by modest./Conceit leads to losses while modesty brings benefits. If a man wants to do good, he must first. The snow outside the door qianshan green, the flower hair riverside February fine. Three branches of peach flowers, spring river water warm duck prophets. This technological standard is applicable to the construction of the insulation layer of loose, slab insulation material and the present water insulation materials for the roof of industrial and civil buildings. 2.1 materials and requirements: 2.1.1 the technical performance of material density and thermal conductivity must meet the requirements of design and construction and acceptance specifications. Loose insulation material should use inorganic material, if choose organic material, should do the anticorrosive treatment of the material first. 2.1.2 materials: 2.1.2.1 loose material, slag, slag or water particle size is usually 5 ~ 40 mm, must not contain any stones, heavy slag lumps and burning of coal, at the end of the packing density of 500 ~ 800 kg/m3, coefficient of thermal conductivity is 0.16 ~ 0.25 W/m. K. Expansion vermiculite thermal conductivity 0.14 W/m · K. 2.1.2.2 plate insulation materials: the product shall have the factory certificate, and the thickness and the specification shall be in accordance with the design requirements. The density, thermal conductivity and strength should meet the design requirements. A. Foam concrete plate: the performance density is not greater than 500kg/m3, and the compressive strength should not be lower than 0.4mpa; B. Aerated concrete plate: the apparent density of 500 ~ 600kg/m3, the compressive strength should be no less than 0.2mpa; C. Polyphenylene plate: the expression density is no more than 45kg/m3, the compressive strength is not lower than 0.18 MPa, and the thermal conductivity is 0.043 W/m. K.