升级说明（Upgrade instructions）.doc

升级说明（Upgrade instructions） Construction safety facilities software 2008 Olympic edition 1. The calculation of wind load of the scaffold module increases the basic wind pressure of the first encounter in 30 years 2. The bracing mode of steel welding on the side girder is added 3. The steel wire rope asymptotic method is added to the suspension scaffold and the suspension scaffold 4. The construction techniques of scaffolding and formwork are added 5. The suspension calculation of overhanging loading platform is added The form and calculation of the staggered support of the beams are added 7. The portal frame is added to support the self-defining function of steel pipe 8. The maintenance function of the door frame is increased 9. When the modified column template is 0 for the root number of the pull bolt, the problem of generating construction plan is reported wrong 10. In the beam (steel pipe rack), the support frame is rearranged 11. Increased the support of the plate formwork steel pipe rack, the support of the plate formwork, and the material converse of the steel frame supported by the steel plate 12. The proposed method for the time of die removal is added 13. Increase the construction plan of tower crane 14. The construction lift module and its construction plan have been added 15. Correction of the influence of horizontal force on the base overturning moment in the base calculation of tower crane 16. Increase the calculation of the base reinforcement setting of tower crane 17. Increase the base resistance and check calculation of tower crane pile foundation 18. Modified the input method of engineering attributes Scaffolds are added to the scaffold 20. Structural hoisting has added the hanging basket and construction plan 21. The scaffolding has added the function of the steel pipe custom 22. The calculation of weld seam of ordinary steel suspension is modified 23. Compatible with Microsoft Office Word 2007 24. Increase the outdoor operating platform module 25.