什么是点对点显示（What is point-to-point display）.doc

什么是点对点显示（What is point-to-point display） Whats the problem with the point-to-point display Point-to-point display problems not only in flat-panel televisions, all fixed pixel display devices have the same problem, such as liquid crystal displays, LCD, DLP projector, projector slightly projectors and so on. The point-to-point display is also called a 1:1 Map or Dot by Dot, which literally means a one-to-one correspondence, and its essence is resolution matching. The fixed pixel display devices, the resolution of imaging devices are fixed, the resolution is generally referred to as resolution of physics, such as the physical resolution 1366 x 768 indicates that its imaging device with 1366 x 768 pixels. At the same time, the pixel is also the basic unit of the image, and the 1920 x 1080 resolution image means that the image is composed of 1920 x 1,080 pixels. The relationship between the image and the display device is like wearing gloves, gloves and hands with five fingers to match, less or more problems. Therefore, only when the resolution of the image or signal source with just the same physical resolution of the television, their pixel is only likely to be one-to-one mapping (point-to-point), so that the TV shows with the source image exactly match the image. 1920 x 1080 or 1280 x 720 resolution 1366 x 768 resolution images displayed on the TV, will appear the resolution of the mismatch problem, transformation, needs to be upward or downward to ensure full screen TV. However, this transformation will result in loss of image clarity, whether the image resolution is upward or downward, and the final image quality is always lower than the original image. The above analysis shows that if the resolution of the image is inconsistent with the physical resolution of the display device, the point-to-point display cannot be realized. This means that when we connect to a flat-panel TV, we must ensure that the display resolution of the computer is the same as the physical res