陶砂砂浆资料（Sand mortar material）.docVIP

陶砂砂浆资料（Sand mortar material） The use of thermal insulation sand mortar, date of release: 2011-05-29? Browsing times: 1536, core tips: 1. Introduce heat insulation ceramic mortar, cement, pottery sand as the main material. Advantages: light weight, high strength, thermal insulation, low thermal conductivity, no burning, no mildew, simple construction, economical and durable. (1) heat preservation and heat insulation ceramic mortar is mainly made of cement and sand. The utility model has the advantages of high strength, thermal insulation, low thermal conductivity, non burning and non mold, construction is simple, economy and durability (polystyrene granule mortar, thermal insulation mortar board or other similar service life of up to more than 20 years), not easy to crack, fall off, pottery sand mortar and normal mortar using the same method and life that is the insulation material of a new generation of green energy saving economic and durable. Two, the scope of application of building exterior insulation, thermal treatment, thermal insulation roof sloping etc.. Three, 1 construction preparation and construction should be in the wall quality inspection and in the wall, door and window frame, concealed pipes and hydropower embedded parts after installation. 2. Before construction, dust, dirt, oil stains and residual ash blocks on the base wall should be cleaned. The surface of the base shall be made up of benzene mortar, flat with sill, and close between door window and wall. Four, construction 1, insulation ceramic sand mortar should be used mechanical stirring (not less than 3 minutes), generally in accordance with the design requirements according to the exterior wall such as three row hole block, cement wall design: ceramic sand ratio 1:6, roof cement: ceramic sand ratio 1:10. 2, the construction process: the primary treatment of lateral line, put in the window and window corner wall reinforcement, with insulation ceramic sand mortar. 3, the construction should b