精馏塔开停车步骤（The rectification tower drives the parking step）.docVIP

精馏塔开停车步骤（The rectification tower drives the parking step） The rectification tower drives the parking step Driving is a very important part of production. The goal is to shorten the time of driving, save the cost, and get the qualified products as soon as possible. Parking is a very important link in production, when the device is running after a certain period, equipment and instrument will be all sorts of problems, continue to maintain production in terms of production capacity and raw material consumption has not meet the requirements of the economic and reasonable, also contains the potential risk of accidents, so need to stop for maintenance, to achieve device failure, as soon as possible into the maintenance phase, must be prepared to stop work, formulate reasonable parking steps, prevent all kinds of possible problems. Take the usual steps of parking The general steps of driving a distillation column include the following steps: A) develop reasonable driving procedures, timetable and necessary preventive measures; Prepare the necessary supplies of raw materials and water and electricity; Prepare the staff and complete the corresponding training. B) at this point, the structure of the tower must comply with the design requirements, tower and tidy, no solid impurities, no congestion, and eliminate all should not be in the form of a, such as the tower of oxygen and moisture content must conform to the provisions; Normal operation of pump and instrument; The security measures have been adjusted. C) pressure and decompression of the tower to normal operation pressure. D) heating and cooling the tower to close the operating temperature. E) add ingredients to the tower. F) open the tower top condenser and the heat source of the reboiler and various heaters, the cooling sources of all kinds of coolers. G) the operating conditions and parameters of the tower are gradually adjusted to make the tower load, and the product quality gradually reaches normal operation value