计算规则（Calculation rule）.doc

计算规则（Calculation rule） Standard format 1. construction quota General description of project (1) (2) total project table (3) division of project cost summary (4) project cost summary (5) technical measures of project cost summary (6) other measures of project cost summary (7) 100 artificial mechanical spread table (8) supplement (sub unit valuation table 9) engineering calculation table 2. of the building area calculation rules According to the national construction administrative departments have promulgated the building area calculation rules, calculation of the provisions of the housing construction area are as follows: (1) full range calculation area The single storey building; The multi-storey building; The structure, different numbers of the same building The basement, semi basement, underground workshops, warehouses, shops, underground station entrances and the corresponding command etc.; The slope buildings using the overhead layer space setting and deep foundation at elevated levels; the height of more than 2.2m; Through the channels of the building, hall, hall and corridors in the building; The indoor staircases, elevator wells, extract wells, garbage Road, Guan Daojing etc.; The library, warehouse; I have a structure of the stage lighting control room; The building equipment pipe layer, the storage room height of more than 2.2m; The upper envelope of the roof water tanks, staircases, elevator room etc.; Outside the building envelope with door, look between and see the elevator, window, balcony, pick Gallery corridor, etc.; A roof overhead corridor between buildings; Outdoor stairs; The building deformation seam, settlement joints, where less than 300 mm in width. (2) the scope of the conversion area There is a column awning, shed, goods shed and platform construction area; independent column awning, single row shed, shed platform construction area; Construction area of column and roof eaves corridor, the outside of the building; there is no column cover co