自喷规范（Automatic specification）.docVIP

自喷规范（Automatic specification） Code for design of sprinkler systems Peoples Republic of China national standard Code for design of sprinkler systems GBJ84 - 85 Editor in chief: Peoples Republic of China Ministry of public security Approval department: State Planning Commission of the Peoples Republic of China Date of implementation: July 1, 1986 Chapter I General Provisions Article 1.0.1 in order to safeguard the socialist construction and the lives and property of citizens, implement the prevention first, combining prevention with elimination of the principle of reasonable design of automatic sprinkler system, fire hazard reduction, formulated norms. Article 1.0.2 the design of fire sprinkler system, should be based on buildings and structures, characteristics of fire hazard and local climate conditions, a reasonable choice of sprinkler system type, do to protect the safety, economy reasonable and advanced technology. Article 1.0.3 this specification applies to sprinkler systems set up in buildings and structures. This specification does not apply to automatic sprinkler systems set up in buildings or structures with special requirements such as gunpowder, explosive, ammunition, explosive device, factory, etc.. Article 1.0.4 the design of automatic sprinkler systems shall, in addition to the provisions of this code, meet the requirements of the current national standards and specifications for the design. The second chapter: dangerous grade of buildings and structures and automatic sprinkling Basic requirements for design data of fire extinguishing systems The 2.0.1 is equipped with automatic sprinkler system of buildings and structures, the risk rating should be based on the fire risk of the size and quantity of flammable substances, the heat of the unit time, fire spread speed and saves the degree of difficulty and other factors, divided into the following three grades: First, serious dangerous level: fire hazard, large fuel, heat, burning and rapid spread of build