闭路线（Closed edge train）.docVIP

闭路线（Closed edge train） Type and performance of common coaxial cable used in engineering: 1) SYV75-3, 5, 7, and 9... 75 ohm, polythene insulated solid coaxial cable. In recent years, some people call it video cable; 2) SYWV75-3, 5, 7, and 9... 75 ohm, physically foamed polyethylene insulated coaxial cable. Some people call it radio-frequency cable; 3) basic performance: The physical structure of L SYV is 100% PE insulation; SYWV is a foamed PE insulated cable with a foaming rate of 70-80%; L due to dielectric loss, SYV solid cable attenuation is larger than those of the SYWV physical foaming cable; cable in common engineering, the physical foaming cables is still the lowest cable transmission performance is the best price, so in the video, RF and microwave band. The test data given by the manufacturer also illustrates this point; L coaxial cable can be used in DC, radio frequency and microwave band. To distinguish cable from radio frequency / video is not only based on insufficiency, but also misleading. It seems that video transmission must or can only choose solid cable (choose big attenuation, high price) From the point of view of engineering application, it is more practical to distinguish between solid core and foaming cable; L series (128) and (64) the difference between low coding cable properties: an experimental study of EIE laboratory showed that in 200KHz, the high series cable shield low resistance played an important role, so the low frequency transmission attenuation is less than low coding cable. But in the above 200-300KHz video, RF and microwave band, due to the high frequency skin effect plays a major role, high coding cable has been lost low resistance advantage, so the high frequency attenuation of two kinds of cables are basically the same. Two, to understand the video transmission characteristics of coaxial cable - attenuation frequency characteristic Coaxial cable manufacturers, attenuation data of several tens to hundreds of megahertz frequenc