高压易错（High voltage error）.doc

高压易错（High voltage error） A single choice 7. transformer ideal parallel operation condition, transformer voltage ratio (A) is allowed to have the difference. A. + 5%B. + 10%C. + 15% 25. overhead power line overhead line when the weak, the intersection angle for a weak line (D). A. 300 B. = 300, C. 450 D. = 450 The vertical distance of 25. overhead line conductors and buildings in the calculation of maximum sag under 3 ~ 10kV line should not be less than (B). A.2.5m B.3m C.4m D.5m The 40. insulating gloves and insulating shoes should be placed in a special cabinet ventilation, cool, the average temperature in the range (B). A.0 DEG to 5 DEG B.5 to 20 DEG C C.20 DEG to 40 DEG D.40 to 60 DEG C Three, determine the title (the right draw tick the wrong picture, *, 1 points for each question, wrongly or not sentenced to 0 points, a total of 36 points) 12. one of the main causes of high voltage capacitor group, abnormal sound is internal overvoltage. (V) 21. support for the general fitting straight line tower or the tension tower jumper, also known as wire clamp. (V) A single choice 9. power supply voltage transformer shall not exceed the rated voltage (B). A. + 3%B. + 5%C. + 15% 19. in general, the ambient temperature is within 400C when the capacitor charge the allowable temperature rise for silicone oil (B). A. 500C B. 550C C. 600C 36. electrical safety tools according to its basic function can be divided into the insulation safety appliance, (D). A. basic and safe appliance B. auxiliary safety appliance C. grounding device D. general safety protection appliances Two, multiple-choice questions 6. one of the main causes of the high voltage capacitor group is shell expansion (BC). The internal A. operation of the extreme temperature changes of B. partial discharge C. use of expired D. Internal Overvoltage Three, determine the title (the right draw tick the wrong picture, *, 1 points for each question, wrongly or not sentenced to 0 points, a total of 36 points) The 26. to