瓷砖鉴别（Tile identification）.doc

瓷砖鉴别（Tile identification） Generally refers to the floor tiles, ceramic tile is a kind of ceramic products made of different materials, a mixture of clay, after cutting air dry dehydration, by high temperature burning, brick plate made of different shapes. It is mainly used in the bathroom, kitchen, balcony metope and ground. Classification of tile: According to different process is usually divided into tiles, glazed tiles and brick etc.. (1) clay glazed tiles by high temperature after molding, and the glaze two baked products rich in color, bright crystal surface. (2) (also called market brick tiles, polished tiles etc.) is the rock debris after high pressure pressing, surface hardness and polished stone, water absorption rate is lower. Types of tile: The common mosaic, including high temperature bricks, bottom brick. 1.: mosaic mosaic tiles in various volume is the most small, usually known as brick. The general is only used in paving theatre such as the kitchen and bathroom, because of its small area, paved floor, not easy to slip down, especially suitable for wet environment. 2.: high temperature high temperature brick brick is made of high temperature and high pressure for paving tiles, compared with ordinary tiles has higher wear resistance. The surface high temperature brick are quite smooth, but good quality of the brick surface, after special treatment, even if the water is not easy to slip. 3. bottom brick: most of tile glaze and brick by the board, if the material is poor or long-term wear, surface glaze will be scratched or off, exposing the underlying brick plate, can not be repaired. Bottom brick made up for this shortcoming, this is a piece of brick made of the same material, regardless of the underlying surface, even by scraping cutting wear, will show another color material, the influence is beautiful; and this brick wear ability is quite strong, suitable for walking tall place momentum. Tile environmental indicators: According to the national enviro