泵类基础知识（Basic knowledge of pumps）.doc

泵类基础知识（Basic knowledge of pumps） No leakage pump, including canned pump, magnetic pump, positive displacement diaphragm pump, electromagnetic pump, etc.. According to engineering habits, no leakage pump refers to canned pumps and magnetic pumps, commonly known as non - seal pump. No leakage pump, including canned pump, magnetic pump, positive displacement diaphragm pump, electromagnetic pump, etc.. According to engineering habits, no leakage pump refers to canned pumps and magnetic pumps, commonly known as non - seal pump. In the no leakage pump, the shield pump is widely used. The pump is mainly composed of a pump body, impeller, stator, rotor, bearing and thrust plate before and after, motor and pump into one, between the stator and the rotor with non magnetic thin material shielding sleeve bearing rotor separated by the before and after the dip in the transmission medium. When the stator winding is energized, the electromagnetic energy is introduced through the shielding sleeve to drive the rotor to rotate, and then to drive the impeller to transport the medium. The magnetic pump is to transmit the motor torque to the pump shaft through the magnetic force generated by the internal and external magnetic rotors mounted on the pump shaft and the motor shaft, and then drive the impeller to transport the medium. When the motor rotates, the outer magnetic rotor attracts each other through the isolation sleeve and the inner magnetic rotor to drive the pump shaft and the impeller to rotate. The number of the magnetic steel blocks of the inner and outer magnetic rotors is the same, and a corresponding magnetic pole relationship is formed, and the two are synchronously rotated. The isolation sleeve completely seals the pump shaft so as to achieve no seal and no leakage. No leakage of pumps are widely used in corrosive medium in chemical production, transportation project of ionic membrane caustic soda chlorine wastewater treatment and adding acid technology (most of the cu