干挂花岗石幕墙节点设计探讨（Discussion on joint design of dry hanging granite curtain wall）.docVIP

干挂花岗石幕墙节点设计探讨（Discussion on joint design of dry hanging granite curtain wall） Discussion on the design of dry hanging granite curtain wall node Release date: 2013-10-18 11:06:33 [Abstract]: This paper summarizes the design of various nodes granite curtain wall, structure design and characteristics of the various nodes are compared through tests of seismic acceleration response, displacement response, the structural displacement between floors, cracks and damage were compared, so as to analyze the different design characteristics. [keyword]: granite, node design, seismic detection. China construction curtain wall industry after nearly more than 20 years of development, has become the worlds largest production country, through technology introduction, absorption and innovation of technology, some have been close to or reached the international advanced level, dry joint structure processing granite curtain wall is also advancing with the times, continuous development. Dry hanging granite joint design of several typical Granite is used more and more widely in engineering in the wall. The wet paste method (also called grouting) inherent defects, dry hanging granite curtain wall has been widely accepted by the owners and architects, in recent years, with the improvement and development of curtain wall technical specification for curtain wall technology, dry hanging granite has increasingly diversified technology and increasingly perfect, include all kinds of technology at present the market, there are about the following six kinds of typical design: Steel pin type dry hanging method: steel pin type dry hanging method called pin method, is the earliest practice of dry hanging stone in the process, is also the most simple approach, steel pin type is divided into four sides connected and side connection structure is characterized in two adjacent stone panel fixed in a steel pin on the steel pin is fixed on the connecting plate and the connecting plate and the frame is fixed,