海康威视常见问题（Hikvision FAQ）.doc

海康威视常见问题（Hikvision FAQ） Hikvision series of DVR common settings and operation 1. how to use the remote control? Alignment of the DVR panel, the operation on the remote control A, according to the key equipment B, input devices, 88 (the default device number is 88, you can modify the main menu - local display) C, press the confirm button If the remote configuration, hard disk video recorder before status lights on the panel turned green. Press the button again to stop the remote control equipment. Every time DVR again after power, remote configuration can be used again. 2. why new machine boot will beep beep beep beep - - - sound, how to remove? Reason： 1: no hard disk machine; 2: the machine installed but no hard disk format; 3: hard disk bad. Clear the way: 1: if you do not need to install the hard disk, please go to the main menu - exception handling, the hard disk is wrong this type of abnormal sound alarm x; 2: if a hard disk, please go to the main menu - management tool - hard disk management, the hard disk is formatted; 3: not solved, the hard disk may be bad, please replace the hard disk. How to set up 3. 7 x 24 hour automatic video? 1 to enter the main menu - video settings, select video channel, tick in the open video option; Into settings, in the video all day long option tick set video type for timing; The copy of the set to the Monday to Monday, click Copy, copy the successful determination; Click OK to save the settings and exit into the video interface settings. In the video settings interface, copy the video channel set to other channels. Click OK to save the settings. 4. how to set up the video parameters, how to calculate the video file size? A stream type, resolution, frame rate, bit rate and video bit rate video type common parameters, use according to the type of equipment to support the selected stream function and appropriate resolution (see various contrast); Video frame rate is generally full frame rate; Bit rate type: Fixed stream: according