建筑cad输出到ps中（Building CAD output to PS）.doc

建筑cad输出到ps中（Building CAD output to PS） Tutorial - CAD into Photoshop method A CAD derived graph to Photoshop problem I write down the following tutorial: 1st, choose from the CAD menu file - Printer Manager: Add Printer Wizard -- the next step -- my computer -- the next step -- adobe---Postscript Lecel 1 - the next step: the next step , select Print to file -- the next step -- the next step: complete 2nd, print, in CAD ctrl+p, Postscript Level 1.pc3 in the name of printing equipment, printing to choose output path of your file, select print settings of your drawings size information, print. (this method can print out the proportion of the figure) 3rd, PS open just print out the EPS format, select 144 pixels, because 144 is 2 times the default 72, therefore can not produce geometric zoom data loss Small CAD import PS If the school building in the map when in order to do more good to map will be accurate and PS CAD color combination. Two software, each one has its own merits. So the exact CAD vector into PS processing has become a very important step. CAD PS summarize generally have three kinds of methods: 1, it is. Although this method is simple, but the effect is not good, but also into the effects and you have the time resolution and cut the figure is the black background, bring a lot of inconvenience to PS processing. The method is very simple, as long as there is QQ or any other software can fix screenshots, if the QQ can not use the PRINT key on the keyboard ~ ~ ~ ~ (the total???) 2, print (not the print scan again!!!) The method is more complex, but the generated image quality is satisfactory, enough for the average user. The normal method of printing, just select the PcblishToweb JPG.pc3 printer in the printer name. If you use the CAD2004 path and file the following version can directly fill or generate the JPG file name. If you use CAD2005 to set up in the back. Then the same preview or print, CAD will generate a JPG file like print, you can import the PS.. 3