setwindowpos（置顶）.docVIP

setwindowpos（置顶） SetWindowPos function: this function changes the size, location, and Z order of a child window at the top of a pop-up window. The child window, pop-up window, and top-level window are sorted according to the order in which they appear on the screen. The top-level window is set at the highest level and is set as the first window of the Z order. Function prototypes: BOOL, SetWindowPos (HWN, hWnd, HWND, hWndlnsertAfter, int, X, int, Y, int, CX, int, cy, UNIT.Flags); Parameter: HWnd: window handle. HWndlnsertAfter: the window handle in the Z sequence in front of the window that is set. This parameter must be one of the window handles or one of the following values: HWND_BOTTOM: put the window at the bottom of the Z order. If the parameter hWnd identifies a top-level window, the window loses its top-level position and is placed at the bottom of another window. HWND_NOTOPMOST: put the window above all non top-level windows (that is, after all top-level windows). If the window is already a non top-level window, the flag does not work. HWND_TOP: puts the window at the top of the Z order. HWND_TOPMOST: puts the window above all non top-level windows. Even if the window is not activated, the window will remain in the top-level position. See how to use this parameter, see the instructions section. X: Specifies the left border of the new location of the window in client coordinates. Y: Specifies the top edge of the new location of the window in client coordinates. Cx: specifies the new width of the window with pixels. Cy: Specifies the new height of the window with pixels. UFlags: window size and location mark. This parameter can be a combination of the following values: SWP_ASNCWINDOWPOS: if the calling process does not have a window, the system will demand a thread with a window. This prevents the calling thread from deadlock when other threads process demand. SWP_DEFERERASE: prevents WM_SYNCPAINT messages from being generated. SWP_DRAWFRAME: draw a border ar