外伸端板节点有限元分析.pdfVIP

36 5 ( ) Vol. 36, No. 5 2 0 0 9 5 Journ l of Hun n University ( N tur l Sciences) M y 2 0 0 9 : 1674-2974( 2009) 05-000 1-06 1 1 1, 2 1 何益斌 , 黄 频 , 郭 健 , 肖阿林 ( 1. , 410082; 2. , 410082) : 为考察外伸端板连接中不同端板厚度螺栓直径螺栓布置对 点受力性能以 及端板强度的影响, 采用有限元数值分析软件ANSYS 建立半刚性端板连接 点模型进行 非线性有限元分析. 在建立模型和计算分析过程中考虑了弹塑性大变形和接触问题. 分析 结果表明: 端板厚度的变化对 点的初始转动刚度极限转动能力以及抗弯承载力都有不同 程度的影响; 点的初始转动刚度随着端板厚度的增加而增加, 但 点的极限转动能力却随 着端板厚度的增加而减小; 设计中建议采用大螺栓中等厚度的端板, 同时螺栓应尽量布置 在靠近梁翼缘一侧; 传统的T 形件方法计算端板强度, 其计算结果偏低. : 端板 点; 强度; T 形件; 有限元; 转动刚度 : TU973. 13 : A Finite Element An lysis for Extended Endpl te Connections 1 1 1, 2 1 HE Y-i bin , HUANG Pin , GUO Ji n , XIAO A-lin ( 1. College of Civil Engineering , Hun n Univ, Ch ngsh , Hun n 4 10082, Chin ; 2. Design Institute of Hun n Univ, Ch ngsh , Hun n 4 10082, Chin ) Abstract: The finite element softw re ANSYS w s used to n lyze the influences of different end-pl te thickness, bolt di meter nd l yout of bolts on joint perform nces nd end-pl te strength in extended end-pl te connections. The n lytic l models took into ccount m teri l nonline rities, l rge displ cements nd geometric l discontinuities. T he n lysis h s indic ted th t the ch nge of end-pl te thickness ffects the initi l rot tion l stiffness, the ultim te rot tion l c p city nd the be ring c p city of connections to v rying degrees. Initi l rot- tion l stiffness of connections incre ses w ith end-pl te thickness, but the utmost rot tion l c p city of connec- tions decre se w ith end-pl te thickness. In o