Ti-24Nb-4Zr-8Sn合金单晶纳米压痕研究-中国有色金属学报.PDF

20 1 2010 10 Vol.20 Special 1 The Chinese Journal of Nonferrous Metals Oct. 2010 1004-0609(2010)S1-s0528-05 Ti-24Nb-4Zr-8Sn (() 110016) Ti-24Nb-4Zr-8Sn (Ti2448) Ti2448 (001)(011)(111) 68.1 69.1 78.9 GPa 3.5 3.5 3.0 GPa Ti2448 TF 804.3 A Nanoindentation study on Ti-24Nb-4Zr-8Sn single crystals ZHANG Yan-wei, LI Shu-jun, HAO Yu-lin, YANG Rui (Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China) Abstract: Nanoindentation techniques were used to determine the hardness and elastic modulus of Ti-24Nb-4Zr-8Sn (abbreviated as Ti-2448) single crystals with different orientation surfaces. Both hardness and elastic modulus anisotropy were observed. The indentation modulus is 68.1, 69.1 and 78.9 GPa on (001), (011) and (111) surfaces, respectively, and the indentation hardness is 3.0, 3.5 and 3.5 GPa, respectively. The variation of the hardness and elastic modulus tested by nanoidentation is consistent with that obtain by the conventional testing method, but the results could not transfer to that of conventional testing method. Key words: Ti2448 alloy; single crystals; nanoindentation; hardness; elastic modulus (Nanoindentation technique) [3]