Accuracy of intraoral and extraoral digital data ...（intraoral精度和extraoral数字数据）.pdf

www.scielo.br/jaos /10.1590/1678-775720150266 Accuracy of intraoral and extraoral digital data acquisition for dental restorations 1 2 1 1 3 3 , Matthias MOLDAN , Bernd WÖSTMANN , 1 1- Universität Ulm, Zentrum Zahn-, Mund-, und Kieferheilkunde, Klinik für Zahnärztliche Prothetik, Ulm, Germany. 2- Private Practice, Salach, Germany. 3- Justus-Liebig Universität, Poliklinik für Zahnärztliche Prothetik, Giessen, Germany. Heike Rudolph - Department of Prosthetic Dentistry - Center of Dentistry - Ulm University - Albert-Einstein-Allee 11 - 89081 - Ulm - Germany - Phone: +49 731-500 64240 - Fax: +49 731-500 64247 - e-mail: heike.rudolph@computerzaehne.de ABSTRACT he computer-aided design (CAD) and computer-aided manufacturing (CAM) process Tchain for dental restorations starts with taking an impression of the clinical situation. For this purpose, either extraoral digitization of gypsum models or intraoral digitization can be used. Despite the increasing use of dental digitizing systems, there are only few studies on their accuracy. Objective: This study compared the accuracy of various intraoral and extraoral digitizing systems for dental CAD/CAM technology. Material and Methods: An experimental setup for three-dimensional analysis based on 2 prepared ceramic master dies and their corresponding virtual CAD-models was used to assess the accuracy of 10 extraoral and 4 intraoral optical non-contact dental digitizing systems. Depending on the clinical procedure, 10 optical measurements of either 10 duplicate gypsum dies (extraoral digitizing) or directly of the ceramic master dies (intraoral digitizing) were made and compa