Capacitance and Inductance Measurements （电容和电感的测量）.pdf

Capacitance and Inductance Measurements Using an Oscilloscope and a Function Generator Application Note Most labs have an ample supply of DMMs for measuring capacitive impedance will have a current waveform that leads DC resistance, but when it comes to measuring inductance, the voltage waveform. An inductive impedance will have a capacitance and impedance, it is not always easy to find an current waveform that lags behind the voltage waveform. LCR meter. Fortunately, if you have an oscilloscope and a function generator in your lab, you can use a similar technique to make LCR meters operate by applying an AC voltage to the device multi-frequency impedance measurements with good results. under test, and measuring the resulting current, both in terms This approach may also be adapted for use as an instructional of amplitude and phase relative to the AC voltage signal. A lab exercise. Application Note Rref RESR RESR Zx DUT I V V VA1 VA2 CS LS