DESIGN AND APPLICATION OF HAIRPIN HEAT （设计和应用的发夹）.pdf

sales@ sales@ DESIGN AND APPLICATION OF HAIRPIN HEAT EXCHANGERS the Petroleum, Petrochemical, the Petroleum, Petrochemical, Chemical and Power Industries. Chemical and Power Industries. Advantages of the Hairpin Heat Exchanger Advantages of the Hairpin Heat Exchanger Two Types of Hairpin Heat Exchangers Double pipe section with one tube, either finned or bare, within each shell pipe. Multi-tube section with multiple smaller tubes, either finned or bare, within each shell pipe. Operate in true counter current flow permitting extreme temperature crossing. Due to their modular concept, hairpin heat exchangers are especially adaptable economically to service changes. The hairpin heat exchanger is ideal for wide temperature ranges and differentials. Because of the U-tube construction, expensive expansion joints are not required. The Hairpin Heat Exchanger The Hairpin Heat Exchanger ASME INSPECTED AND CODE STAMPED ASME INSPECTED AND CODE STAMPED All Holland hairpin heat exchangers are ASME inspected, code stamped and National Board Registered. FINTUBES PRODUCED BY ELECTRIC RESISTANCE FINTUBES PRODUCED BY ELECTRIC RESISTANCE WELDING METHOD WELDING METHOD Our longitudinal fintubes are produced by electric resistance welding method. This assures high heat transfer efficiency throughout the life of the equipment. COMPLETELY ASSEMBLED COMPLETELY ASSEMBLED Multiple sections are shipped completely assembled and ready for one inlet and outlet process piping connection. The Hairpin Heat Exchanger Cont’d The Hairpin Heat Exchanger Cont’d WIDE RANGE OF SIZES WIDE RANGE OF SIZES Holland hairpin heat exchangers are available in