Design and Implementation of Orthogonal （正交设计和实现）.pdf

Design and Implementation of Orthogonal Frequency Division Multiplexing (OFDM) Signaling Design Proposal Study by: Alan C. Brooks Stephen J. Hoelzer Advisors: Dr. In Soo Ahn Dr. Thomas L. Stewart EE 451 December 8, 2000 Project Summary This project will focus on Orthogonal Frequency Division Multiplexing (OFDM) research, simulation, and implementation. OFDM is a modulation technique especially suitable for wireless communication due to its resistance to inter-symbol interference (ISI). After researching OFDM, simulation in MATLAB will be completed. The main part of this project will be using the simulation results as a guide to implement OFDM on a DSP board. Depending on the DSP hardware used, the MATLAB code will need to be converted to either C or Simulink. This makes our code compatible with the software tool for that particular DSP board. To test the DSP code, we will verify that the input and output vectors of the MATLAB simulation and DSP implementation correspond. Importance With the rapid growth of digital wireless communication in recent years, the need for high-speed mobile data transmission has increased. New modulation techniques are being implemented to keep up with the desire more communication capacity. Processing power has increased to a point where OFDM has become feasible and economical. Since many wireless communication systems being developed use OFDM, it is a worthwhile research topic. Some examples of current applications using OFDM include DSL, DAB (Digital Audio Broadcasting), HDTV broadcasting, IEEE 802.11 (wireless networking standard). Project Description This project consists of MATLAB simulation and DSP imple