Definition of Terms Used in Laser Engraving and （用于激光雕刻和定义的术语）.pdf

Technical Help- Laser Laser Engraving and Cutting Terminology Definition of Terms Used in Laser Engraving and Cutting Like all professions, laser engraving and cutting has its own unique language. To better understand the benefits of laser technology, a clear understanding of laser terminology is important. Laser Systems Available Two types of laser systems dominate the commercial laser market. Each has its strengths in various cutting and marking applications. CO2 Laser Systems – CO2 refers to the gas mixture used to generate the laser beam. CO2 laser systems used in the engraving and marking industry can range from 10 watts of power to over 1000. Most compact laser systems are offered in the 10 – 100 watt ranges. These units are capable of marking or engraving wood, glass, Plexiglas, acrylic, rubber, ceramics, coated metals and marble. In the higher wattage (25 or greater), material such as acrylic may be completely and accurately cut out to form various shapes. YAG Laser Systems – These systems operate with a shorter infrared wavelength and are substantially more expensive than CO2 laser systems. These systems are used largely in industrial applications such as cutting, welding, heat treating, perforating and marking. YAG lasers are also used to engrave (mark) bare metals /MARK/techhelpdocs/terms_definitions/laserterms/terminology.asp.htm (1 of 3)9/8/2005 9:37:49 AM Technical Help- Laser that under normal conditions cannot be marked by a CO2 laser system. Related Software and Technique Terms Air Assist – The optional air assist package directs a constant stream of compressed air across the engraving or cutting surface at the point of burn. An invaluable tool for deep, clean engraving and cutting, the air assist removes the heat and combustible gases from the surface of the material. This allows you to use all of the available laser power to cut deeply into materials such as wood, acrylic, rubber o