Grades S30T and S40T productivity and （成绩S30T和S40T生产力和）.pdf

Grades S30T and S40T Productivity and security in titanium milling At the forefront of material’s technology Grades S30T and S40T make use of the latest technology within the development of cutting tool material. They are developed to cope with the tough demands of titanium milling where the thermal, chemical and mechanical loads on the cutting edges come close to the limits of every known cutting tool material. ! w e N Grade S30T for speed and tool life S30T has been developed with productive titanium milling in focus. It combines the properties of micro-grain carbide and a wear resistant PVD coating. This enables very sharp cutting edges that resist fatigue and micro-chipping and results in cutting edges that are preserved for longer times in cut at ! w higher cutting speeds. e N Grade S40T for difi cult conditions S40T is developed for difi cult conditions in titanium milling. It combines cemented carbide, having high toughness, with a thin CVD coating. The result is a grade that withstands vibration and other difi cult cutting conditions for longer times in cut. The wear is predictable, making the cutting edge