MANUFACTURING PROCESSES – II（制造过程二世）.pdfVIP

Module 4 General Purpose Machine Tools Version 2 ME, IIT Kharagpur Lesson 21 Methods of mounting of jobs and cutting tools in machine tools. Version 2 ME, IIT Kharagpur Instructional objectives At the end of this lesson, the students will be able to; (i) State the principles and conditional requirements of mounting jobs and tools in machine tools (ii) Illustrate how the jobs (blanks) and cutting tools are mounted in a. Lathes b. Drilling machines c. Shaping, Planing and slotting machines d. Milling machine e. Grinding machines (iii) Point out the special requirements and methods on mounting job and cutting tools in CNC machine tools. (i) Principles And Conditional Requirements Of Mounting Job And Cutting Tool In Machine Tools The job or blank and the cutting tools essentially need to be properly mounted in the machine tool for achieving desired performance of the machining system. The following principles are generally followed and conditions are maintained; (a) while mounting the job or blank in the machine tool • appropriate selection of work holding device or system from the available resources depending upon; Δ configuration of the machine tool Δ shape, size and weight of the blank Δ kind of machining work to be done Δ order of dimensional accuracy desired Δ volume (number of same job) of pro