Modeling and Validation of Magic Formula Tire （轮胎建模和验证的魔法公式）.pdfVIP

International Conference on Automotive, Mechanical and Materials Engineering (ICAMME2012) Penang (Malaysia) May 19-20, 2012 Modeling and Validation of Magic Formula Tire Model Mohammad Safwan Burhaumudin, Pakharuddin Mohd Samin, Hishamuddin Jamaluddin, Roslan Abd Rahman, Syabillah Sulaiman  Combination slip conditions are represented in Magic Abstract— Tire model is required in order to study vehicle Formula mathematical formulae. Magic Formula tire is able to dynamic behavior for designing control system such as electronic handle combine slip condition. This model provides an stability control. In this study, a Magic Formula tire model was accurate behavior of tire mechanics based on real implemented using Matlab Simulink block diagram. Tire modeling is experimental test data. Vertical wheel load is one of the input the first step to investigate vehicle handling stability. The model was developed based on a set of mathematical equations. The model was variables that influence the production of tire forces and developed based on pure slip and combine slip condition. The moments. Vertical wheel load will contribute to different feasibility of Magic Formula block diagram is validated via contact patch area and tire deformation [2]. In this study, simulation software which is Carsim. For the validation pr