Procedure for the acceptance of loading （程序加载的验收）.pdfVIP

Procedure for the acceptance of loading compart- ments after the transport of prohibited loads 1 Road transport The transporter has two possibilities for releasing a loading compartment after the transport of a prohibited load: Option A: Release by a control organization or certification / inspection body The following steps must be taken in the sequence specified in order to obtain ad- mission of a loading compartment after the transport of a prohibited load. 1. A cleaning operation designed specifically for the nature of the prohibited load must be carried in accordance with a protocol worked out in advance by the company. 2. Assessment of the loading compartment - at the expense of the company - be- fore loading with feed and after the above-mentioned cleaning operation by an independent checking body or certification / inspection body with a certified or accredited status with regard to loading compartment inspections. The release must be performed by a loading inspector who complies with one or several of the following requirements: - He/she is employed by a control organisation or a certification / inspection body which has been accredited in accordance with ISO 17020 (with spe- cialisation in feed / grains or liquid agribulk) and/or accredited in accordance with EN 45011 (where the inspection of loading compartments belongs to the accredited scope). - He/she is employed by an organisation which operates in accordance with a recognised certification system such as ISO 9001: 2008 2015 or equivalent where independent inspection, verification, sampling and testing of arable products can be demonstrated to belong to the certified scope. The control organisation verifies on the basis of the logbook which previous loads have been transported and which cleaning and disinfecting operations have been performed. The loading compar