Profibus RS485 Wiring（现场总线RS485布线）.pdfVIP

PROFIBUS COMPETENCY CENTRE, AUSTRALIA TECHNICAL SERIES DATE: Feb, 09 ORIGINATOR: GRANT WEYMAN DOCUMENT REF: 09/013 SUBJECT: PROFIBUS RS485 WIRING RS485 transmission is balanced to improve noise rejection. It is mandatory to earth the cable screen at both ends to ensure that it is effective at high frequencies. This is normally done by connecting the cable screen to the device earth. Consequently, we must ensure that the device is correctly earthed. Poor shielding or earthing is a very common wiring error! Shielded, twisted-pair cable To other From other devices devices Earth the cable Rx screen at every Rx device Data Data Tx Tx Ensure every device is properly earthed Fig. 1 RS485 Wiring Diagram i The 2 cores in the twisted pair cable carry the Data Line plus (normally red) and minus (normally green), or B-Line and A-line and are surrounded by the shield as shown. It is essential that the core colours are used consistently throughout the network to avoid data errors. PROFIBUS DP devices ar