Profile Wire Screens Wedge Wire（剖面线屏幕楔形丝）.pdfVIP

Phone: 530-644-6574, Fax : 530-644-6929 Email: sales@ Website: Profile Wire Screens Profile Wire screens, also known as Wedgewire, V-wire, and Triwire, are custom made for your application. The features of this type of screen make it an attractive solution for separating solids from liquids, retaining media, filtering, sizing, dewatering, collecting, and distributing. Profile Wire screen offers continuous slot openings that widen inwardly so that particles tend to pass through the screen and reduce blinding. Profile Wire screens are originally produced as cylinders or flat panels. Both methods of manufacturing offer their own features and benefits. Selection of the Profile Wire (size and shape) of is based on open area requirements, blinding considerations and wear life factors. The support rod is selected after considering the application and manufacturing capabilities. Factors in the decision may include beam strength, cost, thickness, and available support rod spacing. Profile Wire Width Relief Angle Typical Support Rod 63V (.063”) 13 degrees Small round or square rod 69U (.071”) 7 degrees Round or Rectangular bar 93V (.093”) 13 degrees Round or Rectangular bar 125V (.125”) 13 or 5 degrees Round or Rectangular bar Profile Wire Screens are usually made of Type 304 stainless steel although other alloys are available. Type 316 stainless steel may be used for salt water installations. High manganese profile wire material is used for abrasive applications such as mineral processing. The all-welded stainless steel construct