Rapid solidification behaviour of Fe and Al （铁和铝的快速凝固行为）.pdfVIP

Rapid solidification behaviour of Fe and Al based alloys Sathees Ranganathan Doctoral Thesis Materials Processing Department of Materials Science and Engineering School of Industrial Engineering and Management KTH – Royal Institute of Technology Stockholm, Sweden Akademisk avhandling som med tillstånd av Kungliga Tekniska Högskolan framlägges till offentlig granskning för aavläggande av Teknologie Doktorexamen, fredagen den 13 November 2009 kl 13.00 i sal F3, Kungliga Tekniska Högskolan, Lindstedtsvägen 26, KTH, Stockholm ISRN KTH/MSE--09/58--SE+CER/AVH, ISBN 978-91-7415-464-1, ISSN-1104-7127 II Sathees Ranganathan, Rapid solidification behaviour of Fe and Al based alloys Materials Processing Department of Materials Science and Engineering School of Industrial Engineering and Management Royal Institute of Technology, KTH SE-100 44 Stocholm, Sweden. TRITA-MG 2009:04 ISSN-1104-7127 ISRN-KTH/MSE--09/58--SE+CER/AVH ISBN-978-91-7415-464-1 © Sathees Ranganathan, Novermber 2009 Rapid solidification behaviour of Fe and Al based alloys Sathees Ranganathan Materials Processing, Materials Science and Engineering Royal Institute of Technology KTH SE-100 44 Stockholm, Sweden Abstract Rapid solidification experiment on Fe-Cr-Mo-Mn-Si-C alloy was performed to investigate metastable phases formed during the solidification. A wide range of cooling rate was used to analyse the sample from melt spinning technique (~107 K/s) to water quenching method (~102 K/s). A single phase featureless structure was obtaind initially in the melt spinning experiment fo