单磁芯饱和电抗器的建模与仿真 modeling and simulation of saturable reactor with single core using matlab.pdfVIP

第 卷第 期 电力系统及其自动化学报 18 4 Vol.18 No.4 年 月 Aug. 2006 2006 8 Proceedings of the CSU-ePSA 单磁芯饱和电抗器的建模与仿真 殷幼军 陆继明 毛承雄 李维波 C华中科技大学电气与电子工程学院 武汉 430074) 摘要 为了研究单磁芯饱和电抗器的控制输出特性 在单磁芯结构中增加一个检测绕组 利用多项式和双曲: 线混合模型拟合了磁芯磁化曲线 基于MATLAB软件建立仿真模型并制成了电抗器实验装置 当交流激励 使饱和电抗器处于饱和状态时 研究检测绕组感应电压峰值 有效值与直流偏磁磁势之间的关系曲线 并绘制 ~ 控制输出特性 仿真和实验表明 该模型很好地反映了饱和电抗器的控制输出特性 有利于优化饱和电抗器 参数 可快速设计实验方案 关键词 饱和电抗器 输出特性: ; ; MATLAB应用 仿真模型; 中图分类号: TM933.1 文献标识码: A 文章编号: 1003-8930C2006)04-0009-05 Modeling and simulation of saturable reactor with single core using MATLAB - - - - YIN You jun LU Ji ming MAO Cheng xiong LI wei bo CCollege of electrical and electronic engineering ~uazhong University of Science and Technology wuhan 430074 China) Abstract A measurement Winding is added to study the control output characteristics of the single core: - saturable reactor Magnetization curve of the core is fitted using polynomial and hyperbola hybrid model Its. . . - simulation model on MATLAB as Well as the experimental device is achieved The control output characteristics are obtained by studying the relationship betWeen inductive voltage and DC magnetic potential When AC stimulation makes it saturated Simulation and experimental results verify the feasibility of the. proposed model Which is useful for optimiz