rena清洗制绒设备培的训.pptVIP

　　　 　　　 　　　　　　　　 　　　　 　;Overview / 概述;Part 1 Components of the RENA  RENA清洗机的组件; intex / inOxSide; Chiller（冷却器）;Electrical Cabinet （电器柜）; Electrical Cabinet Inside  电器柜内部图; Chemical pipes and exhaust pipes 化学品供应管和排风管; CDA and DI-water pipes 压缩空气和纯水供应管; Hot air system 热风系统;General information / 概述; Working process /工作流程;工作流程;Stations / 各槽子位置图;Stations ; Part 2 Turn on the RENA 第二部分 RENA 的开机;InOxSide; Checking before power on/开机前检查;Cold-water ; Cold water; Turn on the RENA / RENA 开机; Turn on the RENA / login RENA的开机 / 登陆;User management / 用户组管理;Part 3 operating system/操作系统;Main screen module overview 主界面模块概观;Software interface of RENA InTex RENA InTex 的软件界面;Software interface of RENA InOxSide RENA InOxSide 的软件界面;Status boxes and info box 状态框和信息框;Info bar / 信息栏;Button bar / 按钮栏;Button bar / 按钮栏;Mode manual / 手动模式;Mode Service / 维护模式;Mode Auto / 自动模式;Button bar / 按钮栏;Additional buttons in the main screen 主界面中附加的按钮; 3.2 Operate the software / 软件操作; system operating / 系统操作;system operating / 系统操作;Click “Manual” button , / 点击Manual 按钮;Click “F4” button three times随后点F4（三次）; Enter the Drives submenu  进入drives 子菜单;Click “All Conveyors” button - “Stop” , click “F10” to return the main screen / 点击“All Conveyor”,点击“Stop ”停止滚轮， 点F10 退回主界面;system operating / 系统操作;The mode field change from yellow “Manual” to green “Auto” / 黄色“Manual”转变成绿色“Auto”;system operating / 系统操作;waiting until the filling chemical process completed. / 等待化学品添加完成;system operating / 系统操作;After click “start” button , all of the modules will be “Ready” and “In Process”. / 点击“start”按钮之后，所有的模块状态变成“Ready”和“In Process”。;Signal light / 信号灯;Signal light / 信号灯;Part 4 Turn off the rena / RENA 的关机;Click the “Stop” button at the bottom of th