个人电脑瞬间开机机制设计与改.pdfVIP

良 Design and Implementation of an Instantaneously turning-on Mechanism for PCs 242 北路 510 242 北路 510 Tel: (02)ext. 3792 Tel: (02) Fax: (02) Fax: (02) e-mail: bai@.tw e-mail: 494505135@.tw method to perform instantaneous turning-on just like other current consumer electronics have done, and we redesign the circuit to reduce the standby power 年來數 (Digital Home) 了量 consumption of a PC. First, we use CMOS as the 數數 current switch, thus avoiding the static current 數不 consumption between chips or modules, and we turn 落 立 off the USB, PS/2 and network controller power supply with the USB, PS/2 and LAN waking-up (Suspend to RAM) function disabled. Second, we turn off the termination (System off)類 resistor power supply for the memory modules. Third, we use the high-efficiency pulse width modulation 路 power regulator to replace the linear power regulator. 金 Fourth, we enlarge the value of the divider resistors (CMOS) for the reference voltage to reduce the leakage current. 漏 列(USB) PS/2 Overall, these improvements reduce the standby 滑路 USB power consumption to 0.7 watts from 2.4 watts. In PS/2 路 了 addition our desig