珠光粉印花配色工艺研究.PDFVIP

Vol.49 第49卷 No.03, Mar. 2012 2012年03月 第03期 研究与技术 珠光粉印花配色工艺研究 1,2 1 丁志平 ，苗海青 (.苏州大学 艺术学院，江苏 苏州 2523；2.江苏省丝绸科学研究所，江苏 苏州 2523) 摘要：通过连续变倍三目体视显微镜对云母钛珠光粉的粒径、形状、大小进行观测，采用标准分样筛、涤纶单纤丝网目对珠光粉的 粒径进行逐一分样筛选，对珠光粉印花时的粒径与筛网关系、珠光粉与黏合剂的配比关系、珠光粉的配色与承印物底色的关系进行了 分析，并将结论应用于多次批量生产，确定了珠光粉的印花工艺。研究结果表明，珠光粉的粒径大小、形状及其在黏合剂中所占的比 例，与丝网目数的选择、承印面料的底色、精细图案边缘的清晰度有着直接关系。 关键词：云母钛；珠光粉；丝网印花 中图分类号：TS94.4 文献标志码：A 文章编号：00-7003(202)03-0005-04 Study on pearl powder printing color technology DING Zhi-ping1,2, MIAO Hai-qing1 (1.Art College, Soochow University, Suzhou 215123, China; 2.Jiangsu Silk Science Research Institute, Suzhou 215123, China) Abstract: Through the continuous zoom stereo microscope on three eyes, particle size, shape, size of mica titanium pearl powder were observed. By using standard sample sieve and polyester monofilament mesh, size of the pearl powder was filtered one by one. When printing on pearl powder, the relationships between particle size and plug mesh, the relationships between pearl powder and the mixture ratio of binder, and the relationships between pearl pink background color and substrate color were analyzed. Furthermore, the conclusion is applied to mass-produce for many times, and the printing technology of pearl powder is identified. The results showed that pearl powders particle size, shape and proportion in the adhesive have a direct relationshi