干式变压器用高导热抗开裂环氧浇注料 high thermal conductive and anti-cracking epoxy resin casting material for dry-type transformer.pdfVIP

绝缘材料 2013 ，46(2) 曾柏顺等：干式变压器用高导热抗开裂环氧浇注料 7 干式变压器用高导热抗开裂环氧浇注料 曾柏顺，饶保林，韦衍乐，梁金兴，虞锦洪 （桂林理工大学 有色金属及材料加工新技术教育部重点实验室，广西 桂林 541004） 摘要：采用氧化铝填料并以环氧-芳香胺为基体树脂制备了一种干式变压器用环氧浇注料，并对其性能与环 氧酸酐-硅微粉浇注料进行对比分析。结果表明：经优化后其固化物的性能优于环氧酸酐-硅微粉浇注料的 性能，其中导热系数为1.44 W/(m ·K) ，螺栓螺母嵌件试样经-30 ～160 ℃冷热冲击10次不开裂，热变形温度为 2 140 ℃，弯曲强度为190 MPa ，拉伸强度为96 MPa ，冲击强度为22 kJ/m 。 关键词：环氧浇注料；环氧灌封料；导热系数；抗开裂 中图分类号：TM215 文献标志码：A 文章编号：1009-9239（2013 ）02-0007-04 High Thermal Conductive and Anti-Cracking Epoxy Resin Casting Material for Dry-type Transformer Zeng Baishun, Rao Baolin, Wei Yanle, Liang Jinxing, Yu Jinhong (Key Laboratory of Nonferrous and Materials Processing Technology, Guilin University of Technology, Guilin 541004, China) Abstract: An epoxy resin casting material for dry-type transformer was prepared by using aluminum ox- ide powder as filler and epoxy-aromatic amine as matrix resin, and its properties were compared with that of epoxy anhydride-silicone powder casting material. The results show that the properties of the cur- ing material after modification are better than that of the epoxy anhydride-silicone powder casting materi- al. The thermal conductivity of the modified curing material is 1.44 W/(m ·K). No crack appears in the samples with embedded steel bolt and nut under -30 ~ 160 ℃ heat-cool shock for ten times. Its heat dis- tortion temperature is 140 ℃, bending strength is 190 MPa, tensile strength is 96 MPa, and impact 2 strength is 22 kJ/m . Key words: epoxy resin casting material; epoxy resin sealing material; thermal conductivity; anti-cracking 0