隔爆电机隔爆结构研制.pdfVIP

隔爆电机隔爆结构研制 电工电气 (20 2 No.8) 工艺与装备 隔爆电机隔爆结构研制 范伟，倪俊芳 (苏州大学 机电工程学院，江苏 苏州 215021) 摘 要：根据间隙灭焰原理，结合端盖式隔爆结构，轴承套隔爆结构和轴承内盖、曲路环、轴承套 组合隔爆结构的特点，从机械结构、润滑、散热等方面设计了一种新型的隔爆电机推盖式隔爆结构。该 结构在推盖上设计了导向平键以更好地实现轴向移动；在隔爆曲路中设计了铜套，避免抱轴后轴承结构 烧熔成一体的危害，并采用了唇密封和轴向水冷的结构以优化电机在恶劣环境中的使用性能；从整体上 提高了电机结构的合理性和使用寿命。 关键词：隔爆结构；轴承套；铜套；润滑；散热 中图分类号：TM357 文献标识码：A 文章编号：1007-3175(2012)08-0055-03 Flameproof Structure Development and Manufacturing for Flameproof Motor FAN Wei, NI Jun-fang School of Mechanical and Electric Engineering, Soochow University, Suzhou 2 02, China （ ） Abstract: According to clearance flame blow-out principle, combined with the features of end cover flameproof structure, bearing sleeve flameproof structure and bearing inner cover, labyrinth ring and bearing sleeve flameproof structure, this paper designed a new type of push cover type flameproof structure for flameproof motors from mechanical structure, lubrication, heat-diffusion etc aspects. Guiding plane key was designed on push cover of the structure so that it’s easy to realize axial moving and copper sleeve in labyrinth ring was designed to avoid danger spindle blocked bearing structure burning and melted into one solid body. Lip sealing and axial water cooling structure were adopted to optimize use performance of motor in bad environment, thus to have raised the reasonability and use life of the whole motor structure. Key words: flameproof structure; bearing sleeve; copper sleeve; lubrication; heat diffusion 0 引言 零件个数较多，公差累积形成的偏差较大 [1-6]。本文 在研