chapter 8. DOOR AND WINDOW FRAMES（第八章。）.pdf

chapter 8. DOOR AND WINDOW FRAMES 8.1 GENERAL 8.1.1 Frames There are two basic types of door and and in the surrounding framing members is window frames: the traditional system of particularly troublesome. interlocking wood members and the integral-flange metal sections. Variations of 8.1.3 Installation of Membrane Around the latter include metal clad and plastic Door Sills coated, but they are similar in sections and Special attention should be paid to the dimensions and equal in performance. Also, jamb-sill corner at the door sill. This edge among the metal types are those designed condition, when not properly detailed, will to be installed in wood-frame buildings and allow water penetration to the wall interior. those designed for concrete openings. (Figures 8-1A to 8-1G) illustrate the proper installation of felt membrane around a door We will not deal with those frames that are sill in a step-by-step manner. designed for concrete-type openings, except to mention that they are not intended (we hope) to be installed in wood-frame 8.2 WOOD FRAMES buildings. To use this type of section in To make a watertight frame head condition, wood-frame buildings is to invite disaster.