CHUNG HUNG STEEL CORPORATION 鴻立鋼鐵（钟挂钢铁公司鴻立鋼鐵）.pdfVIP

CHUNG HUNG STEEL CORPORATION Introduction of Fine Blanking Formability Steel HUNG LI STEEL CORPORATION Productive Facilities Continuous pickling line Oiling and inspection of CPL Batch Annealing Furnace Rolling Mill for gauge control for Spheroidizing Anneal Reversing type Cold Rolling mill Tension Leveler 1. Products Introduction Fine Blanking Formability Steel (FBFS) has wide range of chemical compositions from low carbon steel to middle/high carbon steel and various low-alloyed steels. Beyond the precise conditions of die in following working, when the material produced as steel sheet, the process must be capable to control accurate thickness and good formability, then introduced to versatile fine-blanking applications, such as automobile transmission components, safety critical automotive components, locking systems, interior seat adjusters, braking systems, automated machinery parts and also electronic component categories, door locks etc.. The materials can be fine-blanked with smooth cut edges, so debarring can be eliminated. Manufacturers can obtain products with value-added and cost down. Motorcycle starter component S45C Recliner component SCM415 Although the materials usually dropped in hot rolled gauge range, however they need more function advantages than cold rolled steel. The main quality characteristics includes following: (1) Precise thickness control: can meet the requirement of the die set-up in Fine Blanking operation. The key factor is the achievement within several hundredth mm gauge difference either in rolling or transverse directio