CRAIL TRACK FESTOON SYSTEMS Gleason Reel（CRAIL跟踪节日系统格里森卷）.pdfVIP

® C-RAIL TRACK FESTOON SYSTEMS INSTALLATION INSTRUCTIONS INTRODUCTION The following procedure has been established to provide the customer with a simple and accurate method of installing a Festoon System. Please refer to the dimensional print with bill of material list for parts identification and system specifications. Various sketches are included throughout this bulletin to clarify the assembly procedure. C-RAIL TRACK INSTALLATION A.1 The customer must furnish interfacing mounting brackets or other framework to support the C-Rail track. The bracket spacing requirements are specified on the system dimensional print. A.2 The C-Rail track installation tolerances shall be as follows: A.2.1 The C-Rail slope deviation is not to exceed a rise/run ratio of 1/10 along the rail length and .02/1.00 across the rail width with respect to a true horizontal plane. A.2.2 Gleason Reel’s standard manufacturing tolerances shall apply to the C-Rail shape and camber/sweep deviations. A.3 The C-Rail track must be parallel to the customer’s crane or hoist support rail. Deviation shall not exceed 1 in 10 of length, or 2 for the entire system length. A.4 Determine the distance between the centerlines of the customer’s trolley rail and the C-Rail track by the formula: (Loop Depth [in.] X .20) + (Saddle Width X .50) A.5 The customer’s support framework or brackets may be any suitable structural grade material to suspend the weight of the entire Festoon System. The recommended factor of safety is five (5). HANGING BRACKETS AND C-RAIL TRACK (Figure 1) B.1 Locate the hanging brackets on the underside of the customer’s support brackets with a tension line parallel