Design Analysis of an Electric Induction Furnace （设计分析电动感应炉）.pdfVIP

AU J.T. 9(2): 83-88 (Oct. 2005) Design Analysis of an Electric Induction Furnace for Melting Aluminum Scrap K. C. Bala Mechanical Engineering Department, Federal University of Technology Minna, Niger State, Nigeria Abstract The advancement of any nation technologically has been influenced and elevated by the extent to which it can usefully harness and convert its mineral resources. The productions of metal in foundries and in all human lives have also become a general practice. Different melting tec hniques are in practice with different energy sources. The cleanliness and availability of electrical energy sources in Nigeria is of paramount importance to its use in foundries, hence the need for this design. This paper deals principally with the mechanical and electrical requirements for induction furnace production. The mechanical aspect gives consid eration to the geometrical components, cooling system, and the tilting mechanism. The electrical aspect deals with the furnace power requirement to make it functional . The design was achieved through consideration of relevant theories and their practical application. Keywords: Electrical, Mechanical, Induction, Furnace, Aluminum, Heat energy, Charge, Melting Introduction display a marked decrease in performance level after some years of service and have to be discarded.