DESIGN AND ANALYSIS OF AN AERIAL SCISSOR （设计和分析的空中剪刀）.pdfVIP

JOURNAL OF INFORMATION, KNOWLEDGE AND RESEARCH IN MECHANICAL ENGINEERING DESIGN AND ANALYSIS OF AN AERIAL SCISSOR LIFT 1 2 JAYDEEP M. BHATT, MILAN J. PANDYA 1 M.E. student (Thermal Engineering), Mechanical Engineering Department, 2 Asst. Professor, Mechanical Engineering Department, L. J. Institute of Engineering and Technology, Gujarat Technological University, Ahmedabad – 382210, Gujarat, India. milan_pandya2005@ ABSTRACT: The following paper describes the design as well as analysis of a simple aerial scissor lift. Conventionally a scissor lift or jack is used for lifting a vehicle to change a tire, to gain access to go to the underside of the vehicle, to lift the body to appreciable height, and many other applications Also such lifts can be used for various purposes like maintenance and many material handling operations. It can be of mechanical, pneumatic or hydraulic type. The design described in the paper is developed keeping in mind that the lift can be operated by mechanical means so that the overall cost of the scissor lift is reduced. Also such design can make the lift more compact and much suitable for medium scale work. Finally the analysis is also carried out in order to check the compatibility of the design values. KEY WORDS: Aerial work platform, pantograph, lead screw, helix angle, Von Misses stress. 1. Introduction 2. Design of Different Components of Aerial A scissor lift is a type of platform which moves in Scissor Lift vertical direction. The mechanism