Design And Finite Element Analysis Of Broaching （设计和有限元分析的拉削）.pdfVIP

A.V. Pradeep, K. Ram Prasad, T. Victor Babu / International Journal of Engineering Research and Applications (IJERA) ISSN: 2248-9622 Vol. 2, Issue 6, November- December 2012, pp.067-074 Design And Finite Element Analysis Of Broaching Tools A.V. PRADEEP*, K. RAM PRASAD**, T. VICTOR BABU*** *(Department of Mechanical engineering, SANKETIKA VIDHYA PARISHAD, VISAKHAPATNAM-41) ** (Department of Mechanical engineering, SANKETIKA VIDHYA PARISHAD, VISAKHAPATNAM-41) *** (Department of Mechanical engineering, SANKETIKA VIDHYA PARISHAD, VISAKHAPATNAM-41) ABSTRACT Broaching is a machining process in parts, and stampings. Even though broaches can be which a cutting tool, having multiple transverse expensive, broaching is usually favoured over other cutting edges, is pushed or pulled through a hole processes when used for high-quantity production or surface to remove metal by axial method. runs. The interesting aspect of broaching is that the Broaching, if properly used, is a highly feed is built directly into the broach (cutting tool) and productive, precise and extremely versatile has the machine provide only one function -speed, for process. It is capable of production rates as much metal removal, unlike in the other processes such as as 25 times faster than any traditional metal milling, planning, etc., where the speed and feed are removing methods. Objectives are to lower the the metal removing functions that machine tool is cost of design process by reducing the time required to provide. required to design and fabricate broach tools which was material