双金属裂解连杆熔模铸造工艺优化_钱俊康.pdfVIP

《热加工工艺》 年 月第 卷第 期 2016 3 45 5 双金属裂解连杆熔模铸造工艺优化 钱俊康，姜银方，王科委，刘 振 (江苏大学机械工程学院， 江苏镇江212013) 摘 要： 运用软件ProCAST 软件对主体材料为铸钢且裂解材料为铸铁的双金属连杆熔模铸造过程进行了优化模 拟。结果表明，当浇注方式采用顶注式时在浇口杯、连杆主体、冒口处易产生缩松、缩孔缺陷，影响产品质量；改进铸造方 案，浇注方式采用侧注式，缩松、缩孔缺陷仅在直浇道处产生。 在实际生产中通过切割直浇道来去除缺陷部分而得到理 想的双金属连杆。 关键词：双金属；连杆裂解；熔模铸造； ProCAST DOI: 10.14158/ki.1001-3814.2016.05.020 中图分类号： ； 文献标识码： 文章编号： TG249.5 TH133.5 A 1001-3814(2016)03-0073-02 Optimization of Investment Casting Process of Bimetallic Cracking Connecting Rod QIAN Junkang, JIANG Yinfang, Wang Kewei, LIU Zhen (School of Mechanical Engineering, Jiangsu University, Zhenjiang 212013, China) Abstract ： nvestment casting process of the bimetallic cracking connecting rod （ ain material was cast steel, and The i the m cracking material was cast iron ）was simulated by using software ProCAST. The results show that when using the top casting way, the shrinkage porosity and hole defects are easily produced in the pouring cup, the body of the connecting rod and the riser, which influence the quality of the product; by improvement of casting scheme, the shrinkage porosity and hole defects only occurs in the sprue when using the side casting way. The ideal bimetallic connecting rod can be gotten by cutting the sprue to dislodge the defect in the actual production ： etal; connecting rod cracking; investment casting; ProCAST Key words double m 针对当前发动机连杆裂解技术存在裂不开，连