兰大《工程力学(ii)(材料)》13春在线作业4（Engineering mechanics (ii) (material) 13 spring online homework 4）.docVIP

兰大《工程力学(ii)(材料)》13春在线作业4（Engineering mechanics (ii) (material) 13 spring online homework 4） Spring 13, autumn, the engineering mechanics (II) (material) 13 spring online homework 4 Total score: 100 test time: -- Single topic selection Multiple choice True or false (a total of 10 questions, 40 points.) 1. The basic feature of oblique bending that is different from flat surface curvature is (). A. The load in the oblique bending problem is oblique B. The load surface and the deflection surface do not coincide in the oblique bending problem C. The deflection direction of oblique bending is not vertical downwards D. The load surface in the oblique bending problem is not coincident with the main inertia axis of the cross section of the bar Full marks: 4 points 2. The beam section with only bending moment and no shear force is called (). A. Flat curved beams B. Pure curved beam Full marks: 4 points The maximum positive stress on the curved beam occurs at all points of the dangerous section (). A. Neutral axis B. Farthest from the neutral axis C. Close to the neutral axis D. Half the distance from the neutral axis Full marks: 4 points In the bending internal force, the first derivative of the shear force is equal to (). A. bending moment B. Moment squared C. Load set Full marks: 4 points 5. The curvature of the deflection curve must be maximal at the maximum () when the straight beam of the cross-section is bent and deformed A. the deflection B. corner C. shear D. bending moment Full marks: 4 points 6. For the static problem, the following statement is correct (). A. The number of unknown forces is not uploaded, for review and use. If the answer is needed, my registered name will be smaller than the number of independent equations B. The number of unknown forces is equal to the number of independent equations C. The number of unknown forces is greater than the number of independent equations Full marks: 4 points 7. The core shape of the rectangular section is (). A. the re