减速机选型指南（Speed reducer selection guide）.docVIP

减速机选型指南（Speed reducer selection guide） Speed reducer selection and use The 2008-06-01 insisting 1. Selection guide In order to select the most suitable decelerator motor, it is necessary to understand the detailed technical characteristics of the machine driven by the decelerator motor, and a coefficient fB is required. Use coefficient fB. The selection of decelerating motor shall firstly determine the following technical parameters: working hours per day; The number of stops per hour; The operating cycle per hour; Reliability requirements; Working machine torque T Machine; Output speed n; Load type; Environmental temperature; Heat dissipation conditions at site; The speed reducer is usually designed according to constant torque, stop frequency and normal temperature. Its allowable output torque T is determined by the following formula: T equals T out of X fB T - - - decelerating motor output torque fB - - decelerating motor use coefficient The transmission ratio I = n/n out of the motor power P (kw) P = T out * n out / 9550 * eta output torque T out (N.m) T = 9550 * P * eta/n In formula: n input - input speed eta - transmission efficiency of reducer In selecting decelerating motor, according to different working conditions, the following conditions must be met simultaneously: 1. T is greater than or equal to T working machine 2, T = fB total * T machine In the formula: fB total - total use coefficient, fB total = fB * fB1 * KR * KW fB - load characteristic coefficient, KR - reliability coefficient fB1 - ambient temperature coefficient; 2. Precautions for the installation of reducer When installing the speed reducer, it should pay attention to the central axis of the transmission center, and its error should not be greater than the use compensation of the coupling. Good for the good can extend the service life, and obtain the ideal transmission Dynamic efficiency. When the transmission is installed on the output shaft, it is not allowed to hit with a hammer, usually