判断 首字母汇 高级工（Judge the first letter to the senior engineer）.docVIP

判断 首字母汇 高级工（Judge the first letter to the senior engineer） A: 1: wrong. The voltage loss is allowed to lose the primary low-voltage cable section. 2: thats right. The installer should be able to use the installation tool correctly, live spanner, pipe clamp, etc. No longer sleeve, longer arm, no substitute for hand hammer. 3: wrong. The equipment installed must be tested in accordance with the test items specified in the electrical test procedure. The test is not qualified and can be used. 4: wrong. There is no need to strictly enforce the stop power system during installation May: thats right. When the explosion-proof equipment is installed, it is necessary to protect the explosion-proof surface and prohibit the use of the equipment to make the worktable so as to avoid damaging the equipment. After installation, it should meet the explosion-proof performance requirement. 6: the manual component movements of the installation equipment can be used without special flexibility. B: 1. Correct: the transformer can transform the alternating voltage of a numerical value to the same frequency and the varying voltage. In addition to changing the alternating voltage, the transformer can change the alternating current, change the phase, and change the impedance. 3: to: bkd1-500/1140 (660) : after the relay of the leak-type vacuum feeding switch of the mine is completed, press the reset button and the vacuum feed switch allows the closing of the switch. The range of the length of the semiconductor tripper is 0.4 ~ 1 times that of the rated current 5: wrong: trip semiconductor overvoltage protection device: feeder switch UVW arbitrary sta access resistance capacity device respectively, when the grid appear overvoltage, to eliminate overvoltage by resistance capacity to absorb the harm of lines. 6: wrong: rake bucket of scraper type reloader return resistance large, return roller is faster than working drum. C: 1: the CPU is the core component of PLC, which accepts processing info