硫酸化验方法（Sulfuric acid test method）.docVIP

硫酸化验方法（Sulfuric acid test method） This article is contributed by zsfdsyb DOC documents may experience poor browsing on the WAP side. It is recommended that you first select TXT, or download the source file to the local view. Industrial sulfuric acid This standard applies to industrial sulphuric acid. Formula: H2SO4 molecular weight: 98.08 (according to 1985 international atomic volume) edited this paragraph [edit this paragraph edit this paragraph.] I. technical requirements Industrial sulfuric acid shall meet the following requirements of special items in sulfuric acid sulfuric acid sulfuric acid with qualified fine first qualified fine first sulfuric acid (H2SO4) content,% higher than 92.5 or 98 92.5 or 98 92.5 or 98 92.5 or 98 three free of sulfur dioxide (SO3) content,% = 20 20 20 = 0.02 0.03 ash content% 0.03 0.10 0.03 0.03 0.10 iron (Fe) content,% 0.010 0.010 0.010 0.010 0.030 0.005 arsenic (As) content,% 0.0001 0.005 0.0001 0.0001 8*10-5 of lead (Pb) content,% = 0.001 0.01 0.01 mercury (Hg) content,% less than 0.0005 of nitrogen oxide (N) content,% = 0.0001 sulfur dioxide (SO2) content,% = 0.01 chlorine (Cl) content,% = 0.001 mm = 1605050 color, transparency, ML = 1, 2 and 2 [edit this paragraph edit this paragraph] series This paragraph Two, inspection methods 1. Determination of sulphuric acid content and determination of free three sulfur trioxide content in Oleum The method is GB11198.1-89, the determination of sulphuric acid in industrial sulphuric acid and the calculation of free three sulfur oxide content in fuming sulphuric acid. This standard refers to the international standard ISO910-1977 industrial sulphuric acid and fuming sulfuric acid - Determination of total acidity and calculation of free three sulfur dioxide content in Oleum - Titrimetric method. 1.1 the principle of the method is that the methyl red methylene blue is used as the indicator and the standard solution of sodium hydroxide is used to neutralize the titration to measure the conten