制作衣服流程（Make clothes flow）.docVIP

制作衣服流程（Make clothes flow） 1 preparation tool The tools are as follows: Play version with Long ruler, powder sheet, pencil, eraser, scissors Cut the cloth with Sharp scissors, beads (pin) suture Hand stitch (or sewing machine), thread, bead needle It is important to note that scissors and paper scissors are best separated so that the scissors can survive. Formal process The general procedure is as follows: The pattern, the cloth, the part of the complex pattern design, the joint, the whole hot, try on the correction The first is the typed part. The so-called type is to draw out the prototype of the clothes, which will determine the style and line of the clothes. It is an important and professional knowledge. It is recommended to read some published typed books, and there are many ready-made versions available for reference. The text is absolutely not clear here. Some stores can help, but its not cheap! In comparison, the uniform is easier to play, and the dress and some specially shaped clothes are much harder. The typed version should have clear stereo concept; People are three-dimensional, so its not like paper dolls to cut two pieces of glue. Will draw good version to lay down, remember to the finish line in the actual peripheral, set aside a piece seam, otherwise when sewing, will find that the gap in the farther, the result is smaller than original paintings. Whether its a sewing or a hand stitch, its all stitched together in your original decision. . After the plate is finished, it is the job of cutting cloth; This is a simple step, which is to cut down the required cloth according to the shape of the pattern. Another alternative to typing is called stereoscopic cropping. This method requires two people to carry on together, if one persons words need someone to assist; This is a way of seeing what you get. You will be placed directly on your body to get the shape you want, then spread out the fabric and cut off the excess material. So you can get the same thing