软包墙面装饰工程施工工艺标准(939-1996)（Technical standard for construction of soft wall decoration engineering (939-1996)）.doc

软包墙面装饰工程施工工艺标准(939-1996)（Technical standard for construction of soft wall decoration engineering (939-1996)） This technology is applicable to industrial and civil construction and public indoor wall decoration Engineering Senior soft, such as brocade, leather and other fabrics. Construction preparation: 2.1 material requirements: 2.1.1 covered wall frame, wood keel, floor panels, wood species, specifications, grade, moisture and anti-corrosion treatment, must comply with the requirements of design drawings and wooden structure construction and acceptance (GBJ206? 3) regulations. 2.1.2 soft fabrics and other filling materials must meet the design requirements, and shall comply with relevant provisions of the building decoration design fire. 2.1.3 is commonly used in red and white pine keel material drying dry, moisture content is less than 12%, the thickness should be according to the design requirements, there shall be no decay, knurr, splitting, distortion and other defects, and pre treated. The 2.1.4 panel with plywood (wugeban), a thickness not less than 3mm, color, pattern should be similar with the original wood panel, with dry red and white pine, basswood and Fraxinus hardwood, moisture content is not more than 12%. The thickness of not less than 20mm, and the texture straight, uniform color and pattern approximation, free of knots. Distortion, cracks, discoloration and other defects. 2.1.5 layering, exterior finish of the frame material and wood stick face fabric, usually adopts the semi finished drying dry processing plant, moisture content is less than 12%, the thickness should be according to the design requirements and the appearance is nothing wrong with one; and pre treated. 2.1.6 accessories with waterproof paper or linoleum, latex, nail (nail length should be the surface layer thickness of 2 ~ 2.5 times), wood screws, wood sandpaper, sodium fluoride (purity should be above 75%, no free hydrogen fluoride, its viscosity can be through the No. 120 sieve)