mos说明（Mos说明）.doc

mos说明（Mos说明） Remote desktop connection command DOS remote desktop connection command mstsc /v: 50 /console CMD running command Delete file Rd file name /S Create file MD file name 1., net, user, admin, godmour, /add, create a new user name, admin, password godmour, and default user group member 2., net, user, admin, /del, delete the user whose username is admin 3., net, user, admin, /active:no disable user admin The 4. net user admin /active:yes activates the user admin 5., net, user, admin look at admin users 6., net, localgroup, administratros, admin, /add to increase user rights 7. net view \\IP view remote host shared resources 8. net use x:\\IP\sharename Z (remote to local drive letter to connect net use \\IP\IPC$password /user: name) 9., net, user, admin, godmour, change the password of admin to godmour 10. net start servername starts telnet service Net start servername stops the telnet service Run CMD enter and enter at the command prompt For,%1, in (%windir%\system32\*.dll), do, regsvr32.exe, /s,%1 restore system Tracert 01 to see if the router is working properly Netstat command Netstat, [-r], [-s], [-n], [-a]. Of course, you can also use the netstat / command to see the format of the command and the detailed arguments The netstat parameter has the following meanings -r displays the contents of the local routing table -s displays the usage status of each protocol (including the TCP protocol, the UDP protocol, the IP protocol) -n displays addresses and ports in tabular form -a displays port numbers for all hosts Running the Netstat -a command will show all connections between the computer on the Internet and the outside, the computer port and external connections, etc., and Netstat The -s command displays the statistics of the computer network connection protocol. This way you can see what connections are being made on your computer, and the data packets are sent Send and receive details, and so on Add or remove program control appwiz.cpl Management tool con