夏普复印机维修（SHARP copier repair）.docVIP

夏普复印机维修（SHARP copier repair） Copier maintenance (OA service): General failure: Copies produce black lines, white lines, images are not clear, often jam, out of error code, abnormal sound, the machine does not power, and so on. Go into trouble: The imaging unit: the photosensitive drum (imaging part, the most important note: the image is initially formed on the surface of the photosensitive drum scraper) replacing the aging carrier does not work properly (regular replacement of laser deep cleaning and maintenance of chip level) photosensitive drum component cleaning and maintenance etc.. Fixing unit: upper and lower fixing roller aging, replacement, temperature controller, thermistor, shaft cleaning, maintenance and so on. Incoming / export paper unit: carton (hand feed carton), paper wheel clean, change. The grease lubrication of each clutch, the cleaning and maintenance of each guide wheel (which is one of the reasons leading to frequent jams) Scanning unit: the depth of each reflector glass, lens, CCD, luminous tube is cleaned and maintained Motherboard, power panel unit: the center provides deep chip level maintenance technology, the main board, power board failure of systematic maintenance, repair probability, as much as possible to save your maintenance costs. Drive unit: cleaning of gear assembly, lubrication, lubrication, etc.. Printer maintenance: Inkjet printer: prints have black lines, white lines. Blurring。 Ink leaks often cannot be detected by cartridges. After the ink cartridge is added, the machine lock, machine status, decoding, etc.. The ink cartridge bracket does not return. Paper jam, no paper feed, etc.. An error occurred. Code downtime is not available. The machine has no power supply. To undertake all kinds of brand models (even for system can greatly save the cost, the printing effect is close to the original supplies 80%) installation and commissioning Laser printer: prints have black lines, white lines. The print is not clear. Cardboard often